Gutter Installation & Repair in Tacoma, WA
Seamless gutters, downspout routing, and drainage solutions designed for Tacoma's 38 inches of annual rainfall.
Gutter installation in Tacoma costs between $1,200 and $4,500 for a standard residential home, depending on the number of stories, total linear footage, and downspout configuration. Most gutter installations take 1–2 days. In the Pacific Northwest, properly functioning gutters aren't optional — they're the primary defense against foundation damage, basement flooding, and siding rot.
Ark Roofing & Renovations has provided gutter installation and repair in Tacoma and Pierce County for over 33 years. We install gutters as standalone projects and as part of roofing replacements, ensuring the entire water management system works together.
Why Gutters Matter More in the Pacific Northwest
Tacoma receives roughly 38 inches of rain annually, spread across 150+ days of precipitation. Without gutters — or with gutters that are clogged, sagging, or improperly pitched — all that water cascades off your roof edge and pools at the foundation. Over time, this saturates the soil, erodes landscaping, and creates hydrostatic pressure that pushes water into basements and crawlspaces.
Failing gutters also damage siding and fascia boards as water overflows and wicks behind exterior surfaces. We see this on nearly every siding project — the worst rot is always under leaking gutter joints or overflowing corners.
Properly sized gutters with correct pitch, adequate downspouts, and extensions that direct water at least 4 feet from the foundation are essential for every Tacoma home.
How much do new gutters cost in Tacoma?
Seamless aluminum gutters run $8–$15 per linear foot installed, including hangers and downspouts. A typical single-story home with 150–200 feet of gutter costs $1,500–$3,000. Two-story homes and complex rooflines with multiple corners cost more due to additional downspouts and ladder work. We include cleanup of old gutters in every estimate.
Should I replace gutters during a roof replacement?
If your gutters are over 15 years old, yes. We remove and reset existing gutters during every roof replacement. If they're dented, leaking at seams, or pulling away from rotted fascia, replacing them during the roofing project avoids a second crew and setup cost. The fascia repair, new drip edge, and gutter installation all integrate together for a watertight roofline.
How We Install Gutters
Measure roofline, calculate water volume per roof section, and plan downspout placement for optimal drainage away from the foundation.
Take down existing gutters, inspect and repair fascia boards, replace rotted sections before new gutters go up.
Mount gutters with proper pitch toward downspouts, install hidden hangers every 24 inches, and seal all joints.
Route downspouts away from the foundation with extensions or underground drain pipe. Test the full system with water.
Gutter Questions From Tacoma Homeowners
At minimum twice per year — late fall after leaves drop and late spring after pollen and seed pods. Homes near trees may need quarterly cleaning. Clogged gutters overflow, which defeats the purpose entirely. We also offer roof cleaning services that can be combined with gutter maintenance.
Most residential homes in Tacoma use 5-inch K-style gutters with 2x3-inch downspouts. Homes with steep roofs or large roof areas may need 6-inch gutters and 3x4-inch downspouts to handle the water volume during heavy Pacific Northwest rainstorms. We calculate the correct size based on your roof area and pitch.
Don't Let Tacoma Rain Damage Your Home
Proper gutters save thousands in foundation and siding repairs. Get a free gutter assessment today.
(253) 777-9683Last Updated: April 2026